Directions to Install Mobile Equipment and make Connections
Use the Tandberg Remote Control - this controls all equipment
Press <OK> Menu key in center to make any changes
The Green Call button is to make a call. Dial the
number: enter IP address xxx.xxx.xxx.xxx (do not need all three digits) and use
the * as the "."
Then press the Green call button again to make the call.
If the quality of the call is not acceptable, disconnect and try again - this is not unusual to have to reconnect once or twice to get a decent connection.
Use the Cancel key to hide the menu.
From Menu, under Administration you can set the call quality - best to set everything (AAC, Natural Video, Max Upstream) to a maximum of 384kb. If it's set higher, it will try to connect higher and the connection will appear to be worse unless line quality is perfect.